MATERIALS:
• Fabric (10" x 3.5")
• Interface (10" x 3.5")
• Key Fob Hardware (Key Fob 1.25" & Key Ring)
TOOLS:
• Pliers
• Sewing Machine
• Iron
• Tailor's Chalk
• Scissors
• Fray Check
How to make a Key Fob:
1: Iron the interfacting to the wrong side of the fabric. Then iron under 1/2" on both sides, then fold in half and iron again.
2: Now you are ready to top stitch both side of the fabric.
3: Fray check both ends. Fold in half, lining up the raw edges. [Tip: you could stitch the raw edges to make it more secure.]
4: Clamp the key fob end tip over the raw edges using pliers. I used a please of fabric between the key fob hardware & the piers to prevent the key fob from getting scratched. Make sure to crimp the hardware as tightly as you can.
6: Now attached the key ring to the end of the key fob & your done.